FreeRTOS+TCP for Microzed
Hello,
I am developing with FreeRTOS on Microzed, using Vivado 2015.1.
And I’m interested in FreeRTOS+TCP indeed.
I would be grateful if you could send me the hardware project of FreeRTOS+TCP for Microzed Xc7z010.
Regards
FreeRTOS+TCP for Microzed
Did we already send you the project for the ZC702 (the larger Zynq
evaluation board)? If so that should also run on the MicroZed. As far
as I know only the GPIO pin used for the LED output needs to be changed.
Nothing outside of the Cortex-A9 core is used, so you should be able to
use the default/standard hardware definition for your board. If you add
the hardware definition to the project, then create a BSP for your
hardware definition (both through the Xilinx SDK tools – those steps are
not FreeRTOS specific) then you can switch the application project (the
FreeRTOS+TCP project) to use the new BSP.
Regards.
FreeRTOS+TCP for Microzed
— Did we already send you the project for the ZC702 (the larger Zynq
— evaluation board)?
Is that download codes in page of “FreeRTOS+TCP and FreeRTOS+FAT Source Code”?
If not, please teach me where I could download the project.
FreeRTOS+TCP for Microzed
Thank you for sending the FreeRTOS+ project for Zynq.
I cannot build it at the moment, because “uncached_memory.h” and the relating files are not found. Could you tell me where they are ?
Regards
FreeRTOS+TCP for Microzed
I am just working on the documentation for the Zynq demo now, and the code will be released to the labs site as soon as that is done.
Regards.